Design an Elegant Pull Handle with ZW3D.
A pull handle is the first thing you touch when opening something. Its shape and style indicate the owner’s taste — classic or modern, simple or delicate. But no matter which style, streamlined shape and smooth touch will be the basic demands for its design. So today, I am going to share how to design an elegant pull handle in ZW3D. Why not follow me and DIY one for your house?
First, create a 3D curve profile
Step 1: Create the main profile sketch on the XY plane, then sketch three curves on the XZ plane separately as the profile of the handle model.
Step 2:Extrude the middle curve located on XZ plane to create a surface, then project the main profile onto the surface by Project to Face Command. After that, you will get the 3D curve profile.
Step 3: To better control the middle of the handle, create a section curve for it on the YZ Plane by Sketch command.
Second, generate the surface
You need the U curves and V curves to construct the surface of the handle. You’d better sketch them separately, so that you can create the surface more easily.
Step 1: Click Curve Mesh in Free Form tab, then click the input box of Curve segment and select three curves (First U Go, 2nd U and Last U Go) as U curves. It’s worth noting that you should click the middle button of your mouse to finish the selection for each curve. For the discontinuous curves, you can press the shift button while picking the curves to select a complete one.
Step 2: Repeat the same operations of Step 1 in Curve Mesh to create V curves.
Step 3: Select all the U curves and V curves in Curve Mesh, then click OK. After that, the top surface will be generated.
Step 4: Repeat Step 1-3 to create the bottom surface, then sew the top surface and the bottom surface by selecting the top surface in Sew command.
Third, add pillars and render
Step 1: Create two pillars on the main profile plane by Cylinder. Then connect the pillars and the main part of the handle by Blend Face.
Step 2: Combine the independent shapes into a complete one by Add Shape. Make thread holes by the Hole command. Finally, render the handle by adding colors and materials as you need.
Step 3: Insert the handle into the furniture like a cabinet in the assembly environment.
So far, an elegant pull handle with streamlined shape has been finished in ZW3D. Have you got the tricks? Practice makes perfect. Why not design handles in your own styles with ZW3D? Look forward to your masterpiece.